In order to save time and frustration, many Promethean projector users like to know how to turn on a Promethean projector without a remote. It is actually not as difficult as it may seem. In this comprehensive guide, we will provide you with all the information you need to successfully turn on your Promethean projector without using the remote control.
Promethean Remote Issues
If you’re having trouble with your Promethean remote, there are a few things you can try. First, check the batteries. If they’re low, replace them. If that doesn’t work, try resetting the remote by holding down the power button for five seconds. If that doesn’t work, contact Promethean customer support for help.
If you don’t have a Promethean remote, there are other ways to turn on the projector. One is to use the buttons on the projector itself. Usually there’s a power button and an input button. The power button turns the projector on and off, while the input button will cycle through different input sources (like HDMI or VGA).
If your Promethean remote is not working, the first thing you should check is the batteries. If they’re low, replace them with fresh batteries. This is usually the problem when the remote stops working.
To replace the batteries:
- Open the battery compartment cover on the back of the remote.
- Remove the old batteries (and dispose of them properly).
- Insert new batteries, making sure to match + and – signs.
- Close the battery compartment cover.
Your Promethean remote should now be working again. If it’s still not working, try resetting the remote (see below).
Prometheans are a type of projector that is commonly used in schools and businesses.
If you’re having trouble with your Promethean remote, you may need to pair it with the projector. This is usually done when you first set up the projector, but if you’re having issues with the remote, it’s worth trying again.
To pair the remote:
- Press and hold the power button on the remote for three seconds.
- The light on the front of the remote should start flashing.
- Point the remote at the projector and press any button.
- The light on the front of the remote should stop flashing and stay lit. If it doesn’t, try again from step one.
- The remote should now be paired with the projector and working properly.
Another way is to use a universal remote. Universal remotes can be programmed to work with almost any type of device, including Promethean projectors. If you have a universal remote, consult the instructions that came with it to learn how to program it to work with your Promethean projector.
Once you have your Promethean projector turned on, you’ll need to select the input source. This is usually done with the input button on the remote, but if you don’t have a remote, you can usually do it with the buttons on the projector itself. The most common input sources are HDMI and VGA.
Once you have your input source selected, your Promethean projector should be working properly.
If your Promethean remote is lost, damaged, or faulty, don’t despair! You can still turn on your projector without it. Here’s how:
First, locate the power button on the projector itself. It’s usually on the top or side of the unit. Once you’ve found it, press and hold the button down for a few seconds. The projector should power on.
If that doesn’t work, try plugging the projector into an electrical outlet using the power cord. Again, locate the power button and press and hold it down until the projector powers on.
Once you’ve got the projector turned on, you can use the controls on-screen to navigate through menus and make any adjustments you need.
Keeping Your Remote SafeA good way to do this is to invest in a remote control case. This will protect your remote from being dropped or stepped on, and it will also keep it clean and free of dust and dirt.
Another good tip is to avoid leaving it in direct sunlight. Sunlight can damage the electronic components inside the remote, causing it to stop working properly. If you must leave your remote in direct sunlight, be sure to cover it with a light-colored cloth to protect it from the sun’s harmful rays.
Attach it to something
If your projector is small enough, you can attach it to something that will make it easier to carry. If you’re using a tripod, for example, you can use velcro strips to attach the projector to the tripod. This will make it much easier to move the projector around and keep it steady when you’re trying to turn it on.
Another option is to purchase a carrying case for your projector. This can be especially helpful if you have a larger projector or if you plan on traveling with your projector. A carrying case will protect your projector from damage and make it easy to transport.
When searching for a carrying case, look for one that has padded walls and a sturdy handle or strap. You want something that will protect your projector from bumps and drops. And, make sure the case is big enough to fit your projector, cords, and remote control.
Once you have a carrying case, you can pack up your projector and take it with you wherever you go. This is a great option if you need to use your projector in different locations or if you want to be able to move it around easily.
Keep it in a safe place
The first thing you need to do is find the remote. If you can’t find it, don’t worry!
If you have a Promethean projector, chances are you will have a remote control. The remote is usually black and has buttons that allow you to control the projector. It may also have a power button and an input button. 
The best way to ensure that you don’t lose your Promethean remote is to keep it in a safe place.
You lost the remote, now what?
It’s okay, there are still ways you can operate your Promethean projector even if you don’t have the remote. First, try using the buttons on the projector itself. If that doesn’t work, try connecting to the projector with your computer or mobile device.
If you’re having trouble finding the power button on your Promethean projector, it’s usually located on the top or side of the unit. Once you’ve found it, press and hold it for a few seconds until you see the power light turn on. If your projector has a physical switch, make sure it is in the “on” position before pressing the power button.
Once your Promethean projector is turned on, you should see the startup screen. If you don’t see anything, make sure the projector is pointing in the right direction and that there’s nothing blocking the lens.
If you’re still having trouble turning on your Promethean projector, try connecting to it with your computer or mobile device. For instructions on how to do this, please see your projector’s manual or contact Promethean customer support.
You have the remote, but it doesn’t work!
All you need is the power button on the projector itself.
Ensure that the power cord is plugged into an outlet and that the other end is plugged into the projector. Next, locate the power button on the projector. It should be on the front of the unit, near the lens.
Once you have found the power button, press and hold it for three seconds. The projector should start to power on. If it doesn’t, try pressing and holding the button for five seconds or more.
If your Promethean projector still won’t turn on, check to make sure that the power cord is plugged in securely. If it is, then the problem may be with the projector itself.
Issue #1 – You’ve got dead batteries
If you’ve got a Promethean remote control and it isn’t working, the first thing you should check is the batteries. Dead batteries are the number one reason why remotes stop working.
The good news is that replacing the batteries is usually a quick and easy fix. Just pop in some new AA or AAA batteries and you should be good to go.
If you’ve tried this and your remote still isn’t working, then there could be another issue at play.
Issue #2 – Your remote has kicked itself out of synchronicity with the projector
The second most common issue we see is that your remote has kicked itself out of synchronicity with the projector. If you’re not sure what this means, it’s basically when the two devices are no longer communicating with each other correctly.
There are a few things you can do to try and fix this yourself:
- First, make sure that both the remote and the projector are turned on and within range of each other. If they’re not, then they obviously won’t be able to communicate.
- Try pressing the “sync” button on both the remote and the projector. This will usually reestablish communication between the two devices.
- If neither of those work, replace the batteries in the remote. We’ve found that over time, the batteries in some remotes will gradually lose their ability to hold a charge, which can cause this issue.
Issue #3 – You have received a faulty remote
If you have followed all of the steps above and your Promethean projector still will not turn on, it is possible that you have received a faulty remote. In this case, we recommend contacting Promethean customer support for assistance. 
Your remote is working properly!
There are a few ways to turn on your projector without a remote. The first way is to use the power button on the projector itself. If your projector has a power button, simply press and hold it for a few seconds until the projector turns on.
Another way to turn on your projector is to use the buttons on the control panel. Most projectors have a control panel with buttons that allow you to turn on the device and adjust the settings. To turn on your projector using the control panel, press the power button.
How to turn on a Promethean projector?
Hold the power button for three seconds.
Adjust the settings using the remote. Press the Menu. A menu will appear on the screen. Navigate through the menu and make your changes. 
How can I power my projector without a remote?
There are some alternative methods. The projector’s power button may be used.
Also turn on a projector by connecting it to an AC outlet.
Finally, some projectors have a built-in battery that can be used to power the device. 
How to use a Promethean projector?
Use the accompanying remote control. However, if there is no remote control, use the buttons on it.
How do you use a Promethean remote?
You need to first turn on the power switch. Press the “Menu” to access the main menu. From here, you can navigate through the different options using the arrow buttons on the remote. To select an option, simply press the “Enter” button. To exit out of any menu, press the “Back” button.If there are, move the obstructions out and try again. Another thing you can try is to press and hold the “Menu” for about five seconds.
Is there a Promethean projector remote app?
No, there is not. Although, there are general apps that could potentially work with the Promethean projector. 
For instance, Logitech Harmony Smart Control. This app is compatible with iOS and Android. It can control up to eight devices, including the Promethean projector.
Another option is the Peel Smart Remote. It is compatible with Android and iOS devices. With it, you can control multiple devices.
If you don’t have a smartphone or tablet, you can try a universal remote control. They are available at most electronics stores. Some of them that are compatible with Promethean projectors include the Logitech Harmony 650 and the Philips Prestigo SRU9600.
Useful Video: Promethean Projector Remote Control
There you have it. Those are the steps to turning on a Promethean projector without a remote. They are simple and easy to follow. We hope that this guide was helpful and that you were able to successfully follow the instructions. Thanks for reading!